<address id="jrlvd"></address>

      <form id="jrlvd"></form>

          <address id="jrlvd"></address>

              <address id="jrlvd"></address>

                <form id="jrlvd"></form>

                  <address id="jrlvd"><nobr id="jrlvd"></nobr></address>

                  <form id="jrlvd"></form>

                  <form id="jrlvd"><form id="jrlvd"><th id="jrlvd"></th></form></form>

                      <address id="jrlvd"></address>
                      Current location:Products >LLS-09 termite agent (Low smoke halogen free, PVC used)
                      Synthetic Capsaicin (Nonivamide)Rat proof plastic auxiliaryAnt proof plastic auxiliaryWater soluble chili oilOil soluble chili oilCapsaicin textile oil auxiliary
                      LLS-09 termite agent (Low smoke halogen free, PVC used)
                      LLS-09 termite agent (Low smoke halogen free, PVC used)

                      LLS-09 anti-ant products developed by our company are mainly composed of a variety of pyrethrins and carbamate. Its appearance is white powder, melting point: 86-90℃, decomposition temperature ≥200℃, stable to light and heat. The product has been tested by EU ROHS directive and SVHC for high concern chemicals. It is a kind of low toxicity, high efficiency, long half-life of anti-ant agent, has a strong touch effect, strong knockdown force, rapid efficacy, prevention and control termites is particularly effective. Widely used in PVC and low smoke halogen-free plastic coating. Recommended dosage: 0.6-1.0%

                      Notes:

                      1.As LLS-09 anti - ant products have certain toxicity, do a good job of protection when using.

                      2.In contact with skin, rinse thoroughly with soap and water.

                      Storage:

                      The product is sealed and stored in a cool, dry and ventilated place.

                      The mechanical properties of termite resistant PVC coating plastic were tested as follows:

                      Testing item

                      Standard required

                      Testing result

                      Single conclusion

                      1.Mechanical properties tensile strength before aging (N/mm2)

                      ≥12.5

                      19.7

                      qualified

                      Elongation at break (%)

                      ≥150

                      300

                      qualified

                      2.Air tank after aging

                       

                       

                       

                      Temperature (℃) 100±2, times (h)168

                       

                       

                       

                      Tensile strength (N/mm2)

                      ≥12.5

                      21.7

                      qualified

                      Rate of change (%)

                      ≤±25

                      +9.7

                      qualified

                         Elongation at break (%)

                      ≥150

                       350

                      qualified

                      Rate of change (%)

                      ≤±25

                      16.6

                      qualified

                      3.Thermo-gravimetric experiment

                       

                       

                       

                      Temperature (℃)80±2, times (h)168

                       

                       

                       

                      Weightlessness (%)

                      ≤2.0

                      0.34

                      qualified

                      4.Cracking test

                       

                       

                       

                      Temperature (℃)-, times (h)-

                       

                       

                       

                      Testing result

                      no cracking

                      no cracking

                      qualified

                      5.High temperature pressure test

                       

                       

                       

                      Temperature (℃)80±2, times (h)4

                       

                       

                       

                      Deformation rate (%)

                      ≤50

                      22

                      qualified

                      6.Low temperature impact test

                       

                       

                       

                      Temperature (℃)-15±2

                       

                       

                       

                      Testing result

                      no cracking

                      no cracking

                      qualified

                      Extrusion process is stable, fast exit speed, uniform plasticization, smooth surface, no visible air holes, no peculiar smell.

                      Back
                      Copyright (C) 2021,Tonglu Leitai Biotechnology Co., Ltd. (Liaoning Leitai Biotechnology Co., Ltd.) All Rights Reserved.Supported by ChemNet ChinaChemNet Toocle 31fabu Copyright Notice
                      久久久久久国产精品无码超碰2020|亚洲欧美日韩另类久久久精品|亚洲欧美日韩人成在线播放|P久久亚洲一区二区三区

                      <address id="jrlvd"></address>

                          <form id="jrlvd"></form>

                              <address id="jrlvd"></address>

                                  <address id="jrlvd"></address>

                                    <form id="jrlvd"></form>

                                      <address id="jrlvd"><nobr id="jrlvd"></nobr></address>

                                      <form id="jrlvd"></form>

                                      <form id="jrlvd"><form id="jrlvd"><th id="jrlvd"></th></form></form>

                                          <address id="jrlvd"></address>